CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
纳米固体酸催化一硝基氯苯区域选择性合成
DOI:
作者:
作者单位:

作者简介:

奚立民(1957-),男,副教授,硕士,从事工业催化和有机合成的研究与教学。e-mail: lmxiin@sina.com

通讯作者:

基金项目:

浙江省教育厅科研计划项目(20040109)


Regioselective Synthesis of Mononitrochlorobenzene with Nanosolid Acid Catalyst
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    采用纳米化学技术制备了新型的纳米复合固体超强酸催化剂Fe2O3/SO42-,并用XRD、TEM进行了表征。结果表明: 所研制的Fe2O3/SO42-催化剂为晶态纳米粒子,平均粒径为40 nm,分散性较好; 以Fe2O3/SO42-为催化剂时, 氯苯硝化的区域选择性和活性提高。最佳反应条件为: 催化剂活化温度600 ℃,反应温度50 ℃,n(硝酸)/n(氯苯)=3.5,m(氯苯)/m(催化剂)=20,反应时间6 h,产物收率为78.7%,对位一硝基氯苯与邻位一硝基氯苯之比(P/O)可达4.8。

    Abstract:

    The new nanosolid superacid Fe2O3/SO42- was prepared by using nanometer chemical technology. Samples were characterized by XRD and TEM. The results show that Fe2O3/SO42- is superfine solid belonging to nanocrystal and its average size is 40 nm with good distribution. The regioselection and activity of chlorobenzene nitration was raised,when the nanosolid superacid Fe2O3/SO42- was taken as the catalyst. The optimum reaction conditions were found out. Thus activated temperature of catalyst was 600 ℃,the reaction was carried out at 50 ℃ for 6 h with n(nitric acid)/n(chlorobenzene) equalling to 3.5 and m(chlorobenzene)/m(catalyst) equalling to 20 to get the yield of 78.7%,the ratio between para- and ortho-mononitrochlorobenzene(P/O) reaching up to 4.8.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

奚立民,杨亦文.纳米固体酸催化一硝基氯苯区域选择性合成[J].含能材料, 2006, 14(4):252-256.
XI Li-min, YANG Yi-wen. Regioselective Synthesis of Mononitrochlorobenzene with Nanosolid Acid Catalyst[J]. Chinese Journal of Energetic Materials, 2006, 14(4):252-256.

复制
历史
  • 收稿日期: 2006-03-17
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期: 2011-11-04
  • 出版日期: