CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
方片状变燃速发射药燃气生成规律理论分析
作者:
作者单位:

作者简介:

钟建华(1985-),男,硕士研究生,从事发射药及装药技术研究。

通讯作者:

基金项目:


Theoretical Analysis of Gas Generation about Variable Burning Rate Gun Propellant with Square Plate-shape
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为建立方片状变燃速发射药气体生成猛度Γ与已燃发射药质量分数Ψ的理论表达式,对影响其燃气生成的因素进行理论分析。在几何燃烧定律的条件下,以初始尺寸及内外层燃速比k、密度比y为基本参量,分别建立了方片状变燃速发射药的Ψ-z与Γ-z表达式。通过理论计算,讨论了方片状变燃速发射药的宽厚比β、内外层燃速比k 、密度比y以及外层与总弧厚比δ对燃气生成规律的影响。计算表明,适当调节发射药宽厚比δ、内外层燃速比k 、密度比y以及外层与总弧厚比δ时,可控制方片状变燃速发射药的能量释放规律。当内外层燃速比增加3倍,气体生成猛度最大值增加约2.6倍。

    Abstract:

    To establish the Γ-Ψ expression of variable burning rate gun propellant with square plate-shape,the factors affecting its gas generation were analyzed theoretically. On the condition of geometric combustion law,the theoretical expression between Γ and Ψ were derived,taking the initial size,burning-rate ratios,and density ratio as the basic parameters. By theoretical calculation,influences of width-thickness ratios,outer-to-total thickness ratios,density ratios and burning-rate ratios on the gas generation rule were discussed. The results show that variable burning rate gun propellant with square plate-shape can control the energy release law by using the appropriate width-thickness ratios,outer-to-total thickness ratios,density ratios and burning-rate ratios. The brisance of gas generation increases by 2.6 times when the inner and outer combustion speed ratio triples.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

钟建华,张丽华,萧忠良,等.方片状变燃速发射药燃气生成规律理论分析[J].含能材料, 2010, 18(5):579-582. DOI:10.3969/j. issn.1006-9941.2010.05.022.
ZHONG Jian-hua, ZHANG Li-hua, XIAO Zhong-liang, et al. Theoretical Analysis of Gas Generation about Variable Burning Rate Gun Propellant with Square Plate-shape[J]. Chinese Journal of Energetic Materials, 2010, 18(5):579-582. DOI:10.3969/j. issn.1006-9941.2010.05.022.

复制
历史
  • 收稿日期: 2009-11-16
  • 最后修改日期: 2010-03-05
  • 录用日期: 2010-03-25
  • 在线发布日期: 2012-02-22
  • 出版日期: