CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
密度和冲击强度对ETPE发射药燃烧特性的影响
作者:
作者单位:

西安近代化学研究所

作者简介:

张邹邹(1979-),女,硕士,主要从事发射药性能检测与评估研究

通讯作者:

基金项目:

国防科技重点实验室基金资助(批准号:9140C3502010902)


Effect of Density and Impact Intensity on Combustion Performance of ETPE Gun Propellants
Author:
Affiliation:

Xi'an Modern Chemistry Research Institute

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    通过密闭爆发器、高压熄火装置、扫描电子显微镜(SEM)以及发射药理化性能检测技术,研究密度和冲击强度对含能热塑性弹性体(ETPE)发射药燃烧特性的影响。结果表明,BAMO/AMMO基ETPE发射药的实测密度大于理论密度的84%时,密度对燃烧特性影响明显,密度增加,燃烧速度、燃速系数和压力指数降低;冲击强度与燃烧速度和燃速压力指数呈一定负相关性。

    Abstract:

    The effects of density and impact intensity on combustion properties of energetic thermoplastic elastomer(ETPE) gun propellants were studied by closed bomb test, high pressure flameout set, scanning electron microscopy (SEM) and physicochemical property test. The results show when the actual density of ETPE gun propellant (BAMO/AMMO based) is 84% more than that of theoretical density, with increase of the density, the burning rate, burning-rate coefficients and pressure exponent of ETPE gun propellants reduce. There is a adverse correlation between the impact intensity and the burning rate and pressure exponent of ETPE gun propellants.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

张邹邹,赵宏立,刘毅,等.密度和冲击强度对ETPE发射药燃烧特性的影响[J].含能材料, 2012, 20(2):193-197. DOI:10.3969/j. issn.1006-9941.2012.02.012.
ZHANG Zou-zou, ZHAO Hong-li, LIU yi, et al. Effect of Density and Impact Intensity on Combustion Performance of ETPE Gun Propellants[J]. Chinese Journal of Energetic Materials, 2012, 20(2):193-197. DOI:10.3969/j. issn.1006-9941.2012.02.012.

复制
历史
  • 收稿日期: 2011-03-18
  • 最后修改日期: 2011-09-13
  • 录用日期: 2011-10-25
  • 在线发布日期: 2012-04-23
  • 出版日期: