CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
部分切口多孔杆状发射药的燃烧性能
作者:
作者单位:

(南京理工大学化工学院, 江苏 南京 210094)

作者简介:

徐汉涛(1988-),男,硕士研究生,主要从事发射药配方及工艺研究。e-mail: yan030379@163.com 通信联系人: 何卫东(1962-),男,副研究员,主要从事发射药配方及装药设计研究。e-mail: hewedong@mail.njust.edu.cn

通讯作者:

何卫东(1962-),男,副研究员,主要从事发射药配方及装药设计研究。e-mail: hewedong@mail.njust.edu.cn

基金项目:


Combustion Characteristics of Partially Cut Multiperforated Stick Propellant
Author:
Affiliation:

(School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    部分切口多孔杆状发射药可明显提高装药的装填密度, 合适的切口参数是保持部分切口多孔杆状发射药良好燃烧渐增性的关键之一。为了获得合适的切口参数, 设计并制备了不同弧厚、异向切口间隙、同向切口间距和切口宽度的19孔杆状发射药, 进行了密闭爆发器试验, 研究了切口参数对发射药定容燃烧性能的影响, 并和相应的多孔粒状药燃烧性能进行了比较。结果表明:具有合适切口距的部分切口多孔长杆状发射药可以获得和相同药型的多孔粒状药相近的静态燃烧性能; 本研究药型条件下, 同向切口间距小于20 mm时, 发射药的渐增性燃烧表现较佳, 侵蚀燃烧不明显。

    Abstract:

    In order to obtain the appropriate incision parameters, stick propellant of 19 holes with different web, synclastic incision intervals, incongruous incision intervals and incision web were prepared and studied by closed-bomb test. The influence of incision parameters on constant volume combustion performance was studied and compared with that of porous granular propellant. Results show that the partially cut multiperforated long stick propellant with proper incisions can obtain similar static combustion performance with the granular propellant. In this study, the progressive burning is good and erosion burning is not obvious when synclastic incision intervals is less than 20 mm.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

徐汉涛,肖正刚,何卫东.部分切口多孔杆状发射药的燃烧性能[J].含能材料, 2014, 22(2):251-255. DOI:10.3969/j. issn.1006-9941.2014.02.025.
XU Han-tao, XIAO Zheng-gang, HE Wei-dong. Combustion Characteristics of Partially Cut Multiperforated Stick Propellant[J]. Chinese Journal of Energetic Materials, 2014, 22(2):251-255. DOI:10.3969/j. issn.1006-9941.2014.02.025.

复制
历史
  • 收稿日期: 2013-06-21
  • 最后修改日期: 2013-10-08
  • 录用日期: 2013-11-08
  • 在线发布日期: 2014-04-28
  • 出版日期: 2014-04-24