CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
AlH3/GAP混合体系的热解特性
作者:
作者单位:

(1. 航天工业固体推进剂安全技术研究中心, 湖北 襄樊 441003; 2. 武汉大学化学与分子科学学院, 湖北 武汉 430072)

作者简介:

李磊(1987-),男,在读研究生,主要从事固体推进剂安全性研究。e-mail: lilei2009e@163.com 通信联系人: 赵孝彬(1973-),男,研究员,主要从事含能材料安全技术研究。e-mail: zxb73525@sina.com

通讯作者:

赵孝彬(1973-),男,研究员,主要从事含能材料安全技术研究。e-mail: zxb73525@sina.com

基金项目:

总装“十二五”预先研究项目(51328040101)


Pyrolysis Characteristic of AlH3/GAP System
Author:
Affiliation:

(1. Research Center of Solid Propellant Safety Technology of Areospace Industry, Xiangyang 441003, China; 2. College of Chemistry and Molecular Sciences, Wuhan University, Wuhan 430072, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    采用原位傅里叶红外光谱法(FTIR)研究了AlH3/聚叠氮缩水甘油醚(GAP)混合体系的热解特性。结果表明: AlH3在100 ℃开始分解, 180 ℃达最大分解速率, 250 ℃左右分解完全; GAP在200 ℃左右叠氮基开始裂解, 并形成亚胺中间体, 主链的完全解聚相对滞后; AlH3改变了GAP的分解历程, AlH3/GAP在170 ℃开始分解, 而且在分解过程中没有出现C=N、C=O等不饱和键, 推测是由于AlH3具有较强的还原性。

    Abstract:

    The thermal decomposition of AlH3, glycidyl azide polymer(GAP) and AlH3/ GAP mixed system were studied by in-situ thermolysis-fourier transform infrared spectroscopy(FTIR) coupling techniques. Results show that AlH3 begins to decompose when temperature raises to 100 ℃ and the decomposition rate reaches the maximum at 180 ℃. The azide group of GAP begins to cleavage to imine intermediate at about 200 ℃. The main chain of GAP completely depolymerization is lagging behind. The decomposition process of GAP is changed by AlH3. AlH3/GAP system loses mass when temperature raise to 170 ℃, and during the decomposition of AlH3/GAP, Such unsaturated bonds as C=N and C=O are not observed. The possible reason is the strong reduction of AlH3.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

李磊,程新丽,牛菲,等. AlH3/GAP混合体系的热解特性[J].含能材料, 2014, 22(6):762-766. DOI:10.11943/j. issn.1006-9941.2014.06.010.
LI Lei, CHENG Xin-li, NIU Fei, et al. Pyrolysis Characteristic of AlH3/GAP System[J]. Chinese Journal of Energetic Materials, 2014, 22(6):762-766. DOI:10.11943/j. issn.1006-9941.2014.06.010.

复制
历史
  • 收稿日期: 2013-12-12
  • 最后修改日期: 2014-02-09
  • 录用日期: 2014-03-24
  • 在线发布日期: 2014-12-26
  • 出版日期: