CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
双呋咱并[3,4-b: 3′,4′-f]氧化呋咱并[3″,4″-d]氮杂环庚三烯及衍生物的合成和表征
作者:
作者单位:

(南京理工大学化工学院, 江苏 南京 210094)

作者简介:

夏成波(1989-),男,硕士,主要从事含能材料的合成研究。e-mail: Mr_xia457@163.com

通讯作者:

基金项目:


Synthesis and Characterization of 7H-Difurazano[3,4-b:3′,4′-f]furoxano[3″,4″-d]azepine and Derivatives
Author:
Affiliation:

(School of Chemical Engineering, NUST, Nanjing 210094, China)

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    以3, 4-双(4′-硝基呋咱-3′-基)氧化呋咱(BNFF)为原料, 合成9种不同取代基的双呋咱并[3, 4-b:3′, 4′-f]氧化呋咱并[3″, 4″-d]氮杂环庚三烯(a~i), 探究了成环反应的SN2机理, 并采用核磁、红外、质谱等对其进行了表征。将7-(2-氨基-1-乙基)-双呋咱并[3, 4-b′:4′-f]氧化呋咱并[3″, 4″-d]氮杂环庚三烯(c)与2, 4-二硝基氯苯、2, 4, 6-三硝基-3-氨基氯苯反应合成出两种未见文献报道的化合物, N-(2′, 4′-二硝基苯基)-和N-(3′-氨基-2′, 4′, 6′-三硝基苯基)-7-(2-氨基-1-乙基)-双呋咱并[3, 4-b′:4′-f]氧化呋咱并[3″, 4″-d]氮杂环庚三烯(jk), 通过差示扫描量热法研究这两种物质的热性能, 结果表明, 化合物j的第1、2阶段热分解放热峰分别为258.03 ℃和329.92 ℃, 化合物k的第1、2阶段放热峰分别为275.35 ℃和360.24 ℃, 表明多硝基苯基的引入可提高含能化合物的热稳定性。理论预测了其爆轰性能:j的理论密度、爆速、爆压分别为1.68 g·cm-3、6945 m·s-1、21 GPa, k为1.74 g·cm-3、6438 m·s-1、18 GPa。

    Abstract:

    Nine kinds of 7H-difurazano[3, 4-b:3′, 4′-f]furoxano[3″, 4″-d]azepine(a-i) were synthesized with 3, 4-bis(3-nitrofurazan-4-yl)furoxan(BNFF) as starting materials, and the SN2 mechanism of cyclization was discussed.The structure of these compounds were characterized by 1H NMR, 13C NMR, IR and MS.Then 7-(2-amino-1-methyl)-difurazano[3, 4-b:3′, 4′-f]furoxano[3″, 4″-d]azepine(c) was used to synthesize two new compounds, N-(2′, 4′-dinitrophenyl)-and N-(3′-amino-2′, 4′, 6′-trinitrophenyl)-7-(2-amino-1-methyl) -difurazano[3, 4-b:3′, 4′-f]furoxano[3″, 4″-d]azepine(j, k), by reacting with 2, 4-dinitrochlorobenzene, 3-amino-2, 4, 6-trinitrochloro-benzene.The thermal properties j and k were analyzed by differential scanning calorimetry.Results show that the first and second exothermic peak of compound j are at 258.03 ℃ and 329.92 ℃, and for compound k, they are at 275.35 ℃ and 360.24 ℃, indicating that the introduction of nitrobenzene can increase the thermal stability.The detonation performances were estimated as follows:density, detonation velocity and detonation pressure of j and k are 1.68 g·cm-3, 6945 m·s-1, 21 GPa; 1.74 g·cm-3, 6438 m·s-1, 18 GPa, respectively.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

夏成波,郑春梅,张涛,等.双呋咱并[3,4-b: 3′,4′-f]氧化呋咱并[3″,4″-d]氮杂环庚三烯及衍生物的合成和表征[J].含能材料, 2015, 23(11):1089-1094. DOI:10.11943/j. issn.1006-9941.2015.11.010.
XIA Cheng-bo, ZHENG Chun-mei, ZHANG Tao, et al. Synthesis and Characterization of 7H-Difurazano[3,4-b:3′,4′-f]furoxano[3″,4″-d]azepine and Derivatives[J]. Chinese Journal of Energetic Materials, 2015, 23(11):1089-1094. DOI:10.11943/j. issn.1006-9941.2015.11.010.

复制
历史
  • 收稿日期: 2014-09-17
  • 最后修改日期: 2015-01-07
  • 录用日期: 2015-01-14
  • 在线发布日期: 2015-10-19
  • 出版日期: 2015-10-28