高级搜索

您是今天第:1510位访问者

您是第:10182947位访问者

HTPB推进剂复合型裂纹尖端变形场测量及破坏模式分析
Deformation Field Measurement and Failure Mode Analysis of Mixed Mode Crack Tip of HTPB Propellant
  • 摘要
  •  
  • 参考文献
  •  
  • 引证文献
中文摘要:
      为了实现端羟基聚丁二烯(HTPB)推进剂复合型裂纹尖端变形场测量及破坏模式分析,制作了含中心贯穿复合型裂纹的HTPB推进剂试件,进行了动态拉伸观察试验,获得了复合型裂纹的扩展特性,并通过数字图像相关方法(DIC)得到试件表面及裂纹尖端的应变场,对复合型裂纹尖端应变场特点及应变场与裂纹扩展规律的关系进行了研究。结果表明, 复合型裂纹试件的拉伸过程可以分为线性段、非线性段和失效段三个阶段,裂纹沿与载荷垂直的方向扩展;数字图像相关方法采用大变形分析方法能有效解决试件大变形的问题,可以定量给出试件表面的应变场,且应变集中区域与理论结果吻合;复合型裂纹的扩展与应变场的变化密切相关,应变场在裂纹尖端产生应变集中,导致裂纹扩展。
中文关键词: 端羟基聚丁二烯(HTPB)推进剂  动态拉伸  数字图像相关方法(DIC)  复合型裂纹  应变场
英文摘要:
      To realize the deformation field measurement of mixed mode crack tip and failure mode analysis of hydroxyl-terminated polybutadiene (HTPB) propellant, HTPB propellant specimens with central through-mixed mode cracks were made. Tensile observation test was carried out. The propagation characteristics of the mixed mode crack were obtained. Digital image correlation(DIC) method was used to obtain the strain field on the surface of the specimen and the crack tip. The characteristics of the strain field near the mixed mode crack tip and the relationship between the strain field and the crack propagation law were studied. The results show that the tensile process of mixed mode crack specimens can be divided into three stages: linear segment, nonlinear segment and failure segment, and the crack propagates in the direction perpendicular to the load. The digital image correlation method using large deformation analysis method can effectively solve the problem of large deformation of the specimen, and can quantitatively give the strain field on the surface of the specimen and the strain concentration area is consistent with the theoretical results. The expansion of mixed mode cracks is closely related to the change of the strain field. The strain field generates strain concentration at the crack tip, leading in crack propagation.
英文关键词: hydroxyl-terminated polybutadien(HTPB) propellant  dynamic stretching  digital image correlation method(DIC)  mixed mode crack  strain field
DOI:10.11943/CJEM2018086
投稿日期:2018-04-04
最后修改日期:2018-07-20
网络出版日期:2018-07-05
引用文献:王阳,李高春,王玉峰,等.HTPB推进剂复合型裂纹尖端变形场测量及破坏模式分析[J].含能材料,2019,27(1):14~20.WANG Yang,LI Gao-chun,WANG Yu-feng,et al. Deformation Field Measurement and Failure Mode Analysis of Mixed Mode Crack Tip of HTPB Propellant[J]. Chinese Journal of Energetic Materials(Hanneng Cailiao),2019,27(1):14-20.
作者单位E-mail
王阳 海军航空大学岸防兵学院 1012790115@qq.com 
李高春 海军航空大学岸防兵学院  
王玉峰 海军航空大学岸防兵学院  
史小强 91115部队  
韩永恒 海军航空大学岸防兵学院  
摘要点击次数: 643
全文下载次数: 237
HTML  查看全文   查看/发表评论   下载PDF阅读器

更多>>

更多>>

分享按钮