CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
锥角对具有PELE效应的EFP成型影响的数值仿真分析
作者:
作者单位:

中北大学 机电工程学院

作者简介:

通讯作者:

基金项目:

国家自然科学基金资助 11572291;山西省研究生联合培养基地人才培养项目资助 20160033;中北大学第十四届科技立项项目资助 20171409国家自然科学基金资助(11572291);山西省研究生联合培养基地人才培养项目资助(20160033);中北大学第十四届科技立项项目资助(20171409)


Numerical Simulation Analysis of the Influence of Cone Angle on EFP Forming with PELE Effect
Author:
Affiliation:

School of Mechanical Engineering, North University of China, Taiyuan 030051, China

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为增强反轻型装甲目标弹药的毁伤能力,提出了一种内含低密度装填材料的变壁厚弧锥结合药型罩。使用有限元软件LS-DYNA分析了各锥角对爆炸成型弹丸(EFP)成型的影响规律和EFP对靶板的侵彻效应,拟合得到EFP成型参数曲线与EFP成型速度的曲线方程。结果表明,药型罩内锥角α1取166°~170.2°,装填物内锥角α2取160°~166°,装填物外锥角α3取140°~152°,药型罩外锥角α4取132°~140°时EFP成型速度较快、成型效果较好;α3对EFP成型速度、长度与径向尺寸影响最大,α1对EFP中心厚度影响最大。基于研究结果对药型罩结构进行优化,优化后的药型罩能够形成具有明显横向效应增强型侵彻体(PELE)效应的EFP,在射入靶板时对其扩孔,并在穿透靶板后碎裂形成高速破片对目标内部进行二次毁伤。

    Abstract:

    To enhance the damage effectiveness of anti-light armor target ammunition, a kind of variational-wall-thickness arc-cone liner with low-density loading material was proposed. The influence law of each cone angle on explosively formed projectiles (EFP) forming and the penetration effect of EFP on target plate were analyzed by finite element software LS-DYNA. The curve of EFP forming parameters with each cone angle was obtained by fitting. Results show that when the inner cone angle α1 of liner takes 166°-170.2°, the inner cone angle α2 of filler takes 160°-166°, the outer cone angle α3 of filler takes 140°-152°, the outer cone angle α4 of liner takes 132°-140°, the EFP forming speed is fast and forming effect is good. The α3 has the greatest influence on the forming speed, length and radial dimension of EFP, and the α1 has the greatest influence on the center thickness of EFP. Based on the research results, the structure of the liner was optimized. The optimized liner can form an EFP with distinct penetrator with enhanced lateral efficiency(PELE) effect, which expands the hole when penetrating the target plate and forms some high-speed fragments in the target interior to cause secondary damage after penetrating the target plate.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

王雪飞,尹建平.锥角对具有PELE效应的EFP成型影响的数值仿真分析[J].含能材料, 2019, 27(2):104-112. DOI:10.11943/CJEM2018139.
WANG Xue-fei, YIN Jian-ping. Numerical Simulation Analysis of the Influence of Cone Angle on EFP Forming with PELE Effect[J]. Chinese Journal of Energetic Materials, 2019, 27(2):104-112. DOI:10.11943/CJEM2018139.

复制
历史
  • 收稿日期: 2018-05-23
  • 最后修改日期: 2018-11-21
  • 录用日期: 2018-07-28
  • 在线发布日期: 2018-10-15
  • 出版日期: 2019-02-25