CHINESE JOURNAL OF ENERGETIC MATERIALS
+Advanced Search

Density Evolution Law in Compacting Molding Powder (I): Construction of Loading Curve Equation
Author:
Affiliation:

(1. Institute of Chemical Materials, CAEP, Mianyang 621999; 2. Graduatedepartment,China Academy of Engineering Physics, Mianyang 621999, China)

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
    Abstract:

    To evaluate the compressibility of modeling powders and determine the pressing process parameters economically and efficiently, a study on the density evolution law of modeling powder during loading was conducted. Firstly, two kinds of TATB based PBX-A and PBX-B modeling powders were taken as the research objects. Based on the normal temperature load-displacement data obtained under the three pressures, their respective pressure-density curves were obtained via transformation. Then, the loading curve equations for the two kinds of modeling powders were constructed by the Kawakita equation and Gerdemann-Jablonski equation used in powder metallurgy, respectively. Finally, the accuracy of the description of the two equations was evaluated, and their suitability for describing the density evolution law in the PBX molding powder pressing process was analyzed. The results show that both the Kawakita equation and the Gerdemann-Jablonski equation can all describe the density evolution cgaracteristics of PBX-A and PBX-B modeling powders in high accuracy. But in contrast, the Gerdemann-Jablonski equation is better than the Kawakita equation, the average relative error of two equations for the PBX-A modeling powder is 1.23% and 1.79% respectively, the average relative error of two equations for the PBX-B modeling powder is 0.95% and 1.57% respectively. Since the description accuracy of the Gerdemann-Jablonski equation is higher than that of the Kawakita equation, and the equation parameters can reflect the flow, rearrangement, and deformation characteristics during loading process, the physical meaning is more clear, therefore, it is more worthy of popularization and application.

    Reference
    Related
    Cited by
Article Metrics
  • PDF:
  • HTML:
  • Abstract:
  • Cited by:
Get Citation

张远舸,田勇,周红萍,等.造型粉致密化成型中的密度演化规律研究(Ⅰ):加载曲线方程的构建[J].含能材料,2018,26(7):602-607.
ZHANG Yuan-ge, TIAN Yong, ZHOU Hong-ping, et al. Density Evolution Law in Compacting Molding Powder (I): Construction of Loading Curve Equation[J]. Chinese Journal of Energetic Materials,2018,26(7):602-607.

Cope
History
  • Received:November 01,2017
  • Revised:January 17,2018
  • Adopted:
  • Online: July 19,2018
  • Published: July 25,2018