CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
二硝基甲苯硝化反应的热危险性分析
作者:
作者单位:

作者简介:

陈利平(1981-),女,讲师,主要从事化学反应过程热安全方面的研究。email: clp2005@hotmail.com

通讯作者:

基金项目:


Thermal Hazard Analysis of Dinitrotoluene Nitration
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    采用差示扫描量热仪(DSC)、绝热加速度量热仪(ARC)和反应量热仪(RC)对二硝基甲苯(DNT)硝化反应的热危险性进行了研究。DSC的测试结果表明产物梯恩梯(TNT)的起始分解温度是298.38℃,低于DNT的起始分解温度;而ARC的测试结果显示TNT的开始分解温度为232 ℃,最大反应速率达到时间为24 h时所对应开始温度TD24为224 ℃;反应量热实验表明DNT硝化过程的放热剧烈,且110 ℃时反应放热量是90 ℃的1.4倍,这些热量中有很大一部分来自于副反应放热。因此,该反应必须严格控制温度,避免温度过高引起放热副反应加剧和产物的二次分解。

    Abstract:

    Differential Scanning Calorimeter(DSC),Accelerating Rate Calorimeter(ARC) and Reaction Calorimeter (RC) were used to study thermal hazard of dinitrotoluene(DNT) nitration. DSC results show onset temperature T0 of trinitrotoluene(TNT) is 298.38 ℃, which is lower than that of DNT. ARC results demonstrate that TNT starts to decompose at 232 ℃, and TD24 of TNT decomposition is about 224 ℃. Based on RC test results, there is a large amount of heat release during DNT nitration, and the heat generation at 110 ℃ is 1.4 times heat generation at 90 ℃, in which a large part comes from the exothermal side reaction actually. Therefore, temperature should be controlled strictly to avoid acutely exothermal side reaction and product decomposition.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

陈利平,陈网桦,彭金华,等.二硝基甲苯硝化反应的热危险性分析[J].含能材料, 2010, 18(6):706-710. DOI:10.3969/j. issn.10069941.2010.06.022.
CHEN Li-ping, CHEN Wang-hua, PENG Jin-hua, et al. Thermal Hazard Analysis of Dinitrotoluene Nitration[J]. Chinese Journal of Energetic Materials, 2010, 18(6):706-710. DOI:10.3969/j. issn.10069941.2010.06.022.

复制
历史
  • 收稿日期: 2010-07-27
  • 最后修改日期: 2010-10-18
  • 录用日期: 2010-10-22
  • 在线发布日期: 2012-02-22
  • 出版日期: