CHINESE JOURNAL OF ENERGETIC MATERIALS
+高级检索
横向效应增强型侵彻体对不同材料靶板的作用性能
作者:
作者单位:

海军驻沈阳弹药专业军事代表室,陆军军官学院,南京理工大学 机械工程学院,南京理工大学 机械工程学院,黑龙江北方工具有限公司

作者简介:

宋成俊(1979-),男,大学本科,工程师,主要从事弹药工程设计与检测。e-mail: scjren@163.com

通讯作者:

叶小军(1976-),男,博士研究生,主要从事为战斗部设计与仿真研究。e-mail: yexiaojun0512@126.com

基金项目:


Interaction Performance of PELE Penetrating Target Plate with Different Material
Author:
Affiliation:

Military ammunition in Shengyang Representative Office,Officer Academy of PLA,School of Mechanical Engineering , NUST,School of Mechanical Engineering , NUST,Heilongjiang North Tool Co. Ltd , Heilongjiang

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
    摘要:

    为了研究不同材料的靶板对横向效应增强型侵彻体(Penetrator with Enhanced Lateral Effect,PELE)的影响,采用三维非线性动力学有限元程序LS-DYNA,在速度900~1300 m·s-1范围内,对一定弹体结构和材料的PELE撞击不同材料的金属薄靶进行数值仿真,并将仿真结果与实验数据进行比较,发现两者能较好的吻合。针对仿真和实验结果进行相应的理论分析发现:惯性压缩阶段是影响横向速度的关键阶段,并且横向速度随着靶板密度和体积模量的增大而提高。

    Abstract:

    By use of three-dimensional nonlinear dynamic finite element program LS-DYNA, a series of numerical simulations of pelletrator with enhanced lateral effect (PELE), which had the same projectile structure and material, pentetrate different metal targets with the same velocities (900~1300 m·s-1) were presented. The simulation results were compared with the experimental and in good agreement with the experimental data. The corresponding theoretical analysis between the results of simulation and experiment shows that the process of the inertia compression has much to do with the effect for PELE, and the PELE has better lateral effect with the increasing of density and bulk modulus of the target.

    参考文献
    相似文献
    引证文献
文章指标
  • PDF下载次数:
  • HTML阅读次数:
  • 摘要点击次数:
  • 引用次数:
引用本文

宋成俊,宋丽丽,杜忠华,等.横向效应增强型侵彻体对不同材料靶板的作用性能[J].含能材料, 2012, 20(6):705-709. DOI:10.3969/j. issn.1006-9941.2012.06.010.
SONG Cheng-Jun, SONG Li-li, DU Zhong-hua, et al. Interaction Performance of PELE Penetrating Target Plate with Different Material[J]. Chinese Journal of Energetic Materials, 2012, 20(6):705-709. DOI:10.3969/j. issn.1006-9941.2012.06.010.

复制
历史
  • 收稿日期: 2012-08-17
  • 最后修改日期: 2012-09-28
  • 录用日期: 2012-10-09
  • 在线发布日期: 2012-12-25
  • 出版日期: